33
1. Press ( ) until you get to the “TEMP” Menu. The display will
scroll “TEMPERATURE FORMAT.” After the second scroll, if no
action is taken, the system will revert back to the Main Menu.
2. Press or to switch between °F or °C. Once selected
press (
) to save the change. The system will return to the
“TEMPERATURE FORMAT” Menu.
Programming the Language
Your new spa comes with four language display options. To pro-
gram the display language, follow the steps below:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current
settings will remain active.
1. Press (
) until you get to the “LANG” Menu. The display will
scroll “LANGUAGE MENU.” After the second scroll, if no action is
taken, the system will revert back to the Main Menu.
2. Press or to display the current language.
3. Press or to scroll through the languages available. The
choices are English, French, German and Spanish. Once a se-
lection is made, press (
) to save the change. The system will
return to the “LANGUAGE MENU.”
Programming the Lock Feature
You can prevent users from changing certain features of the spa.
There are two lock modes to choice from:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current
settings will remain active.
• Access Lock will disable the ability to manually activate or
adjust any feature of the spa. All scheduled operations will
still be preformed.
• Settings Lock will disable the ability to change any of the
user settings. You can still activate the jet pumps and li-
ghting. All scheduled operations will still be preformed.
Activating a lock feature.
1. Press (
) until you get to the “LOCK” Menu. The display will
scroll “LOCK MENU.” After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press or to switch from “AL” (“ACCESS LOCK”) to “SL”
(“SETTINGS LOCK”). Once a selection is made, press to save the
change. The system will return to the “LOCK MENU.”
Deactivating a lock feature.
To deactivate a lock mode, press and hold ( ) for 10 seconds.
Resetting the Wi-Fi Connection (optional feature)
If there is a need to reset the Wi-Fi connection, follow the steps
below:
Note: If no button is pressed within 5 seconds of each selection
the screen will revert back to the Main Menu and the current
settings will remain active.
• Any time the spa is connected to the Wi-Fi the Wi-Fi icon
will be displayed.
1. Press ( ) until you get to the “WIFI” Menu.
2. Press (
) to enter the reset menu. The display will read
“RSET” and scroll “RESET WI-FI.”
3. Press (
) to reset the system.
Spa Maintenance
Proper and regular maintenance of your spa will help it retain its
beauty and performance.
Information regarding spa cleaning and maintenance and
the products to be used can be found in the catalogue-gui-
de provided with the product.
Cleaning The Filters
Your Jacuzzi spa is equipped with a skimmer bag and two high
performance pleated lter cartridges located under the lter co-
ver. The circulation pump drawing water through the skimmer
bag and lter cartridge lters ne debris. Large debris is ltered
by jets pump 1 drawing water through the skimmer bag and se-
cond lter cartridge during an automated Secondary Filtration
Cycle or when jets pump 1 is manually activated during spa use.
Combined, both lters provide unsurpassed water quality by
trapping surface oils and suspended particles. The lter cartrid-
ge should be cleaned once a month or as necessary, depending
on use, for optimum performance.
Dispenser per la sanitizzazione dell’acqua
Presso i rivenditori autorizzati Jacuzzi è possibile acquistare un di-
spenser (al cui interno vanno posizionati i prodotti per la sanitizza-
zione dell’acqua).
This dispenser must be placed in the ltering cartridge (recogni-
zable by the grille cover on the compartment) connected to the
circulation pump.
The dispenser must always be removed (while wearing latex glo-
ves) along with its cover during cleaning of the lter, and is to be
reinstalled when this operation is complete.
TO DECREASE RISK OF DEATH, DROWNING OR ENTRAP-
MENT, ALWAYS TURN POWER TO SPA OFF BEFORE CLEANING
THE FILTER CARTRIDGES!
Refer to steps on following page for complete lter cleaning/
replacement instructions:
B
C
D
(Filter Cover Back View)
To Next Page
Loading...
Need help?
General
