Page 14
7.0 Spa Fill Up Procedure
1. Prepare The Spa For Filling
polished at the factory, you may want to treat it with a specially
formulated spa cleaner. Consult your authorized Jacuzzi dealer for
• Remove both ProClear
™
as illustrated in section 12.1 (page 41).
2. Fill Spa
CAUTION:
hard water and the rest of the way with softened water. Or,
additive available from your authorized Jacuzzi dealer.
of each headrest in its lowest position. DO NOT OVERFILL!
IMPORTANT:
after draining. Failure to do so may cause air to be trapped
in either pump, preventing the pump from circulating water.
-
trated in section 12.1 (page 41).
3. Turn On Power
Refer to page 48-50 for additional information.
4. Activate Jets Pumps
5.
To Next Page
Loading...
