Page 41
11.7 Programming The Change Filter Reminder
Your new spa is equipped with a programmable “Change Filter” reminder
a regular basis but does not affect spa operation in any way. The
interval. It offers a selectable range from 10-120 days or can be
disabled (turned off). We recommend an initial setting of 60 days
(2 months) to remind yyy
months of operation.
polishing bag. Note: this reminder must be reset at each lter cleaning
interval. Refer to section 12.1 below for lter cleaning instructions.
Programming Instructions
1. Press the CYCLE button 6 times. The main display reads “FIL”
indicating the “Change Filter” display program has been accessed.
2. Press SELECT button once to display the currently programmed
3. Press WARMER or COOLER button to change duration
setting as follows:
0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 - OFF
4. Press DISPLAY button once to save changes and return to the
standard water temperature display. Note: If no button is pressed
within 30 seconds, all changes are recorded and the screen auto-
matically returns to the standard water temperature display.
12.0 Spa Maintenance
Proper and regular maintenance of your spa will help it retain its beauty
and performance. Your authorized Jacuzzi dealer can supply you with
all the information, supplies, and accessory products you will need to
accomplish this.
12.1 Cleaning The Filter Cartridges
g interval.
Refer to section 11.7 (above) for additional information and pro-
gramming details. Your new spa is equipped with an advanced
pump drawing water through the ProClear
™
To Next Page
Loading...
Need help?
General
