Page 42
-
by creating a “swirling” water motion to maximize particle agitation and
To ensure optimum performance, the 24-hour ProClear
™
months and replaced once a year and the secondary
ProClear
™
To accomplish this,
refer to the following lter cleaning procedure. Note: Do not
attempt to wash the polishing lter bag (B) or it will come apart!
ALWAYS TURN POWER TO THE SPA OFF BEFORE CLEANING THE
FILTER CARTRIDGES! NEVER OPERATE SPA WITHOUT FILTER
LID (2) AND SKIMMER ASSEMBLY (4) INSTALLED.
approximately 5 degrees until you feel it unlatch.
you feel it latch in place. DO NOT FORCE LID! FINGER
TIGHT ONLY!
-
To Next Page
Loading...
