Page 40
• Press DISPLAY , MODE ,
and WARMER
spa functions will operate normally.
• Press DISPLAY , MODE
, and COOLER
11.5 Locking Filter Cycles
• ycles: Press CYCLE button, then within 30
seconds, press DISPLAY , MODE and WARMER
on the screen. In this state, the status of the cycle program may
• ycles: Press DISPLAY , MODE
and COOLER
11.6 Temperature Setting Lock
-
undisturbed.
• perature Setting: Press WARMER or
COOLER button to display temperature setting, then
immediately press the DISPLAY , MODE , and
WARMER
symbol will appear on the screen.
• perature Setting: Press WARMER or
COOLER button to display temperature setting, then
immediately press the DISPLAY , MODE , and
COOLER
To Next Page
Loading...
