Page 18
8.0 Control Functions
8.1 Control Panel
A. Select Button:
Filter cycle
programming
features.
B. Cycle Button:
cycle program
mode and next
cycle.
C. Mode Button:
sections.
D. Display Button: Displays time of day and initiates time setting and
E. Invert Button: Inverts the main 4-digit LCD display.
F. Warmer and Cooler Buttons: These buttons display, increase or
decrease the temperature setting. They also display other program-
mable features.
G. Light On/Off Button: Turns waterfall, footwell and logo lights on
in unison. Press once for high intensity; press a second time for
medium intensity; press a third time for low intensity; press a fourth
time to turn off. The displayed color is changed using the light mode
button (H) below.
H. Light Mode Button: Selects one of 5 color modes for waterfall,
footwell, and logo lights. See page 25 for additional information.
I. JETS 1 Button:
J. JETS 2 Button:
A
B
C
D
E
G
H
I
J
F
STAN DARD
AM
PM
A
B
C
D
E
G
H
I
J
F
STAN DARD
AM
PM
*Display shown for example purposes only, actual
water temperature will vary.
To Next Page
Loading...
