Page 17
headrests in their lowest position (DO NOT OVERFILL!)
CAUTION:
with hard water and the rest of the way with softened water.
water additive available from your authorized Jacuzzi dealer.
13. Consult your authorized Jacuzzi dealer for chemical recommen-
dations, then add chemicals to spa water to achieve a constant
this manual.
-
ing and leave your spa cover open until the sanitizer level falls below
CAUTION: Never leave your spa unattended for any reason
while the cover is open and accessible to small children and
animals!
CAUTION:
a waterborne illness, maintain water chemistry within step 6
parameters. If you or other bathers experience such a condi-
15. Establish a sanitizer reading between 3.0-4.0 ppm Chlorine or 2.0-
4.0 ppm Bromine, then allow the spa to set undisturbed for 8 hours.
Retest water after 8 hours to determine if sanitizer levels are stable.
If sanitizer levels are stable, your spa is ready for use. To ensure
healthy water conditions, always maintain a constant sanitizer read-
If sanitizer levels are not stable at this time, it will be necessary to
repeat this procedure in its entirety (steps 1-15) until stable sanitizer
readings are achieved.
To Next Page
Loading...
