Page 59
D. Open/Close Front Panel
insert wet discs into unit or CD player will be damaged!
E. Radio Operation
Press source button (4) to select radio mode. Station frequency is
indicated on display.
• To Select Band: press band button (12) to toggle through radio
band stores up to 6 independent presets, for a total of 18 FM and 12
• To Program Presets: tune in desired radio station, then press and
hold desired preset button for at least 2 seconds. ”PX”, where
X=preset number, appears at bottom right of the display. Note:
When power to spa is shut off for any reason, all station presets are
reset.
F. Automatically Setting Station Presets
To automatically set station presets to their next higher stations, press
the preset button (1 to 6) from which to start programming, then press
and hold the auto button (16) for 3 seconds. The current station preset
and additional preset memories up to P6 will be reprogrammed with their
next higher tunable stations. When the auto preset cycle is complete,
the unit will remain in preset scan mode and continue scanning for
presets until the auto button (16) is pressed. To select only the strongest
can be set sequentially by selecting the next band and continuing the
operation during auto programming.
G. Seek / Manual Tune
Holding either button down will increase or decrease the displayed
frequency manually. When the desired frequency is reached, release
the button. The unit remains in manual tune mode for 3 seconds after
To Next Page
Loading...
Need help?
General
