Jacuzzi J-470 - Power Requirements for Export Models (50 Hz)

Page 17
J-400
• All Export 50 Hz Models:
Export 50 Hz (1 Breaker Connection)
Single Breaker
Service 1
(including Heater)*
Single Breaker
Service 1
(including Heater)**
Voltage:
230 VAC 230 VAC
Max. Current Draw:
1-Pump System
2-Pump System
3-Pump System
15A
17A
29A
22A
29A
36A
Wattage:
1-Pump System
2-Pump System
3-Pump System
3,5kW
3,9kW
6,7kW
5,1kW
6,7kW
8,3kW
Frequency:
50 Hz 50 Hz
Number of Wires:
3 3
Single breaker conguration is the factory default.
*
In this conguration, the heater will not operate while any jets pump is
running. The service 1 breaker will include connection for all components.
**
In this conguration, the heater will operate while one or two jets
pumps are running. The service 1 breaker will include connection for all
components.