Page 56
J-400
C. Programming the ProClarity/ProClear Filter Timer
A programmable lter timer can be set to remind
you when to clean or replace the lters and
skimmer bag. Tap
ProClarity 60
(Figure 12.6b)
to enter the Programming Menu.
1. From the “Water Care” Menu you can to set
the “ProClarity” timer, Figure 12.6g.
2. Tap or to change the days in 10-day
increments. The range is from OFF to 180 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain clean and working lters, it should be program as
instructed.
3. Tap to conrm and save your changes.
4. When the timer expires, a message will
appear on the control panel display, Figure
12.6h. The lters must be cleaned or
replaced. Follow the instructions above to
reset the timer. If you tap “snooze” the
message will clear but the error icon will
display and the reminder screen will reappear
in 10 days. Refer to Section 13.1, page 61, for
cleaning instructions.
5. Tap to return to the “Water Care” Menu. Tap
again to return to the Settings Menu.
D. Programming the ProClarity Depth Filter Timer
A programmable lter timer can be set to remind
you when to replace the ProClarity Depth Filter.
Tap
ProClarity Depth
50
(Figure 12.6b) to enter the
Programming Menu.
1. From the “Water Care” Menu you can to set
the “ProClarity Depth” timer, Figure 12.6i.
2. Tap or to change the days in 10-day
increments. The range is from OFF to 90 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain clean and working lters, it should be program as
instructed.
3. Tap to conrm and save your changes.
4. When the timer expires, a message will
appear on the control panel display, Figure
12.6j. Follow the previous instructions to
reset the timer. The lter must be replaced.
Refer to Section 13.1, page 61, for lter
location. If you tap “snooze” the message will
clear but the error icon will display and the
reminder screen will reappear in 10 days.
5. Tap to return to the “Water Care” Menu. Tap again to return to the
Settings Menu.
Figure 12.6g
60
60 days left
add
days
ProClarity
Reminder
It’s time to clean or replace
your ProClarity and Pro-
Clear filters. Contact your
authorized dealer if new
filters are needed.
snoozereset
Figure 12.6h
50
40 days left
add
days
ProClarity Depth
Figure 12.6i
Figure 12.6j
Reminder
It’s time to replace your
ProClarity Depth filter.
Contact your authorized
dealer for a new filter.
snoozereset