Jacuzzi J-470 - Water Quality Maintenance

Page 63
J-400
E
Lift unthreaded lter
cartridge from skimmer
well.
F
Cartridge 1
If used, remove the
chemical feeder as
instructed prior to rinsing
the lter cartridge. Rinse
debris from lter pleats
using a garden hose and
high-pressure nozzle.
Start at the top and
work downward towards
handle. Repeat until all
pleats are clean.
G
1 1
Remove the lter pins
1
in order to separate
the ProClarity lter and
canister.
H
1
2
3
Once the lter pins are
removed, rotate the
lter cartridge handle
counterclockwise to
unthread from the lter
canister. You can clean
the lter
1
and canister
3
, but you must
replace the ProClarity
Depth Filter
2
every 3
months.
I
Canister
Cartridge 2
Rinse debris from lter
pleats using a garden
hose and high-pressure
nozzle. Start at the top
and work downward
towards handle. Repeat
until all pleats are clean.
Rinse out any debris
from the canister.
J
1 1
Reassemble the
ProClarity Filter.
Remember to replace
the depth lter with a
new one. Once the lter
is assembled, secure it
with the lter pins
1
.