EasyManua.ls Logo

Jacuzzi J-470 - Page 83

Jacuzzi J-470
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 77
J-400
17. Panel Com Error: The topside controller is having trouble
communicating to your spa. Contact your authorized dealer or
service organization.
18. Stereo Com Error: The stereo is having trouble communicating to
your spa. Contact your authorized dealer or service organization.
19. Wi-Fi Com Error: The Wi-Fi module is having trouble communicating
to your spa. Contact your authorized dealer or service organization.
20. CLEARRAY Replacement Reminder: This message
will appear when the CLEARRAY bulb reminder time
has expired (Figure 15.0d). The CLEARRAY bulb
must be replaced.
21. ProClarity/ProClear Filter Reminder: This message
will appear when the lter reminder time has expired
(Figure 15.0e). Remove the ProClarity/Proclear lters
and lter/debris bag for cleaning or replacement.
22. ProClarity Depth Filter Reminder: This message
will appear when the lter reminder time has
expired (Figure 15.0f). The ProClarity Depth lter
must be replaced.
23. Water Refresh Reminder: This message will appear
when the “Water Refresh” timer has expired (Figure
15.0g). The water needs to be drained and relled
with fresh water.
24. Extended Temperature Activated: The spa is set to go
up to 104°F (40°C), but it can be set to reach 106°F
(41°C). To access the extended temperature you
need press and hold your nger over the temperature
reading for about 5 seconds. The temperature reading will start to
blink to indicate the system is ready. Tap to raise the temperature
up to 106°F (41°C).
Note: The heater icon will be blinking to indicate that the feature is
active.
WARNING: RISK OF HYPERTHERMIA (OVER-HEATING)
CAUSING SEVERE INJURY, BURNS, WELTS OR DEATH!
Water temperature in excess of 104°F (40°C) may be injurious
to your health.
!
Reminder
It’s time to replace your
CLEARRAY bulb. Contact
your authorized dealer for
replacement parts.
snoozereset
Figure 15.0d
Reminder
It’s time to clean or replace
your ProClarity and Pro-
Clear filters. Contact your
authorized dealer if new
filters are needed.
snoozereset
Figure 15.0e
Reminder
It’s time to replace your
ProClarity Depth filter.
Contact your authorized
dealer for a new filter.
snoozereset
Figure 15.0f
Reminder
This is a general
reminder. Please change
your water soon.
snoozereset
Figure 15.0g

Table of Contents

Other manuals for Jacuzzi J-470

Related product manuals