Jacuzzi VIRTUS - Troubleshooting: System Integration; Heat Exchanger Pump Issues; Heat Pump Integration Problems; Temperature Display Discrepancies

42
The pump
(#)
dedicated to the heat ex-
changer does not work
The Jacuzzi® Eco Heat/Cool Power heat
pump does not work.
Signicant dierences in temperature be-
tween the heat pump screen and the hot
tub screen.
One of the causes could be the incorrect
setting of the “b1/b2” switch bench.
One of the causes could be the incorrect
setting of the “b1/b2” switch bench.
One of the causes could be the incorrect
setting of the “b1/b2” switch bench.
Refer to the “Electrical Connections and
Safety” section.
Refer to the “Electrical Connections and
Safety” section.
Refer to the “Electrical Connections and
Safety” section.
(#): pump installed on the circuit prepared by the installer, not provided by Jacuzzi®.
* : This type of repair requires the intervention of qualied personnel.
Contact your Jacuzzi® dealer or an authorised Service Centre.
It is the responsibility of the installer/owner to ascertain compliance with specic local regulations prior to installation. Jacuz-
zi Europe S.p.A. gives no guarantee in this respect and declines all responsibility regarding the compliance of the installation
performed.