Jadever JCL Series User Manual

5) Leveler
6) HI Lamp (ON)
Indicating parameter item
sounds. (See 5. Function Setting, setting buzz
OK Lamp (ON) --
Indicating parameter item
sounds.
LOW Lamp (ON)—Indicating
parameter
7) ― PRESET TARE” Sym bol ― ‖
p
numeric keys.
8) ― NET” Net weigh t -- Gross weig
h
PRESET TARE action is done.
9) ― STABLE” St able indication , S
y
is in stable condition.
10) ― ACAI” Symbol ― ‖ points
a
recalculated.
11) ― M+” Sym bol ― ‖ points at “M
+
12) “UW” Under entering a kn
o
entered unit weight is lower than 4/5 of scale
accurate quantity calculations.
13) ― SMPL” Under t he s am
ple
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is
10 pieces.
14) “UNIT WEIGHT”
Unit Weight Window
number of weighments.
15) “TOTAL COUNT” Total
count window
weighing pan, or accumulated piece count
16) “WEIGHT” Weight Window--
Displays weight of object on weighing pan, or accumulated
weight value.
4-2-2 Keyboard
1)
0 ~9
numeric keys Enters specific values for tare; unit weight and other data
2) ● key Decimal point
(II)
Indicating parameter item
is selected when setting
buzz
sounds. (See 5. Function Setting, setting buzz
sounds)
Indicating parameter item
or
is selected when setting
parameter
item
is selected when setting buzz
p
oints at “PRESET TARE” when T are v alue
h
t m inu s T a re. Symbol ― ‖ points at “NET”
w
y
mbol ― ‖ appears at the top of “STA
B
a
t “ACAI” when th e a v erage un it weigh t
is
+
” when sca le is in a cc umulation m ode .
o
wn unit weight mode, Symbol ― ‖ point
s
entered unit weight is lower than 4/5 of scale division. Unit weight is too small for ensuring
ple
c ounting m ode , Sym bo l ― ‖ points
at
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is
Unit Weight Window
--
Displays the average unit weight value, or
count window
–
Displays the calculated number of pieces on the
weighing pan, or accumulated piece count
value.
Displays weight of object on weighing pan, or accumulated
numeric keys Enters specific values for tare; unit weight and other data
buzz
is selected when setting
buzz
is selected when setting buzz
sounds.
en t ered v ia
w
hen TA RE or
B
LE” when sca le
is
calculated
or
s
at ― UW” when
division. Unit weight is too small for ensuring
at
“SMPL” when
calculated unit weight is lower than 4/5 of scale division or the quantity of sample is
less than
Displays the average unit weight value, or
Displays the calculated number of pieces on the
Displays weight of object on weighing pan, or accumulated
numeric keys Enters specific values for tare; unit weight and other data
entries.

Jadever JCL Series Specifications

General

Brand	Jadever
Model	JCL Series
Category	Scales
Language	English