To Next Page
H
Heidi HansonAug 18, 2025
Why does the symbol of battery appear on my Jadever Scales?
- Eemily35Aug 18, 2025
The battery symbol appearing indicates a warning for lower voltage. Replace the battery to resolve this issue.
Why does the symbol of battery appear on my Jadever Scales?
The battery symbol appearing indicates a warning for lower voltage. Replace the battery to resolve this issue.
What to do if my Jadever JWE-3K Scales display Err5?
Err5 indicates that the weight is over +9e than the full capacity. Remove the excess weight from the scale.
What causes unstable readings on my Jadever Scales, and how can I fix it?
Unstable readings on your Jadever Scales can be caused by several factors: * An object under the pan: Remove the object. * Wind influence: Move the scale to a stable environment. * Low battery: Check the battery. * Electromagnetic disturbance: Remove the source of the disturbance.
What does it mean when my Jadever JWE-3K Scales show Err2 & -Err2?
The Err2 & -Err2 error message on your Jadever Scales can be caused by a few things: * The delivery protection screw hasn't been released: Loosen the delivery protection screw. * The offset value of the zero point is over +10%: Recalibrate the scale. * There is an object under the pan: Remove the object.
What does it mean when my Jadever Scales show Err3 & -Err3?
The Err3 & -Err3 error on your Jadever Scales could be due to: * The delivery protection screw not being released: Loosen the delivery protection screw. * An object being under the pan: Remove the object. * A malfunction in the main board: Check and replace the main board.
How to fix AC power or battery recharge issues with Jadever JWE-3K Scales?
If your Jadever Scales are not charging or the AC power isn't working, it could be due to: * A malfunction in the fuse of the power socket: Check and replace the fuse. * A malfunction in the transformer: Check and replace the transformer. * A malfunction in the fuse of the LCD board: Check and replace the fuse. * A malfunction in the battery: Check and replace the battery. * A malfunction in the charging circuit: Check and replace the charging circuit.
What to do if Jadever JWE-3K display issues with LCD, backlight or buzzer?
If you're experiencing issues with the LCD display, LCD backlight, or the buzzer on your Jadever Scales, the issue might be: * A malfunction in the battery wire & battery: Check and replace. * A malfunction in the power circuit: Check and replace. * A malfunction in the switch: Check and replace. * A malfunction in the LCD, LCD driver, or related circuit: Check and replace. * A malfunction in the backlight, backlight driver, or related circuit: Check and replace.
What does Err4 mean on my Jadever JWE-3K Scales?
Err4 indicates a malfunction in the related circuit of the main board EEPROM. Reset and recalibrate the scale.
What does it mean if my Jadever JWE-3K Scales (JCE) show OVEr?
OVEr on JCE Jadever Scales means the number of weighing cargo members exceeds 99999. If you need to count pieces over 100000, do it in multiple sessions (each not exceeding 99999).
What does Err6 mean on Jadever JWE-3K?
Err6 indicates the use of an incorrect calibrating mass. Use the correct mass for calibration.
General| Capacity | 3 kg |
|---|---|
| Division/Readability | 0.1g |
| Display | LCD |
| Auto Power Off | Yes |
| Overload Indication | Yes |
| Power Supply | AC adapter or 6 x AA batteries |
| Units | g, oz |
