To Next PageTo Next PageWhat to do if Jadever JWL-30K Scales show wrong calibration weights?
If your Jadever Scales display an error related to calibration weights, ensure that you are using the correct weights, matching the calibration value to the full load.
What to do if Jadever JWL-30K Scales show overload condition?
If your Jadever Scales indicate an overload condition, remove the weight from the pan that exceeds the scale's capacity.
What to do if Jadever JWL-30K exceed tare or pre-tare range?
If Jadever Scales exceed the tare or pre-tare range, ensure that the tare value is above zero and does not exceed the full load capacity.
What to do if Jadever Scales exceed the initial zero point?
If your Jadever Scales exceed the initial zero point: 1. Check the scale pan for any foreign objects and remove them. 2. If the issue persists, it may indicate a load cell failure, requiring replacement or professional service.
How to fix EEPROM failure in Jadever JWL-30K?
If you encounter an EEPROM failure with your Jadever Scales, re-solder the EEPROM.
What to do if the accumulated number of weighments exceeds the display range on Jadever JWL-30K Scales?
If the accumulated number of weighments exceeds the display range on your Jadever Scales, delete the excess weighments.
What to do if Jadever Scales lower limit is higher than upper limit?
If the lower limit is higher than the upper limit on your Jadever Scales, re-enter the upper limit and lower limit settings.
What to do if Jadever JWL-30K Scales exceed the A/D resolution range?
If your Jadever Scales exceed the A/D resolution range: 1. Check for A/D failure and replace the A/D if necessary. 2. If the problem persists, it may indicate a load cell failure, requiring replacement or professional service.
What to do if Jadever Accessories shows overload condition?
If your Jadever Accessories display shows an overload condition, it means the weight on the scale pan is exceeding its capacity. Remove the excess weight from the pan to resolve this issue.
Why does my Jadever Accessories exceed the initial zero point?
If your Jadever Accessories exceeds the initial zero point, first check the scale pan for any foreign objects and remove them. If the problem persists, it may indicate a LOAD CELL failure, which requires replacement or professional service.
General| Capacity | 30 kg |
|---|---|
| Readability | 5 g |
| Display | LCD |
| Power Supply | AC adapter or rechargeable battery |
| Material | Stainless steel |
Overview of scale specifications, including capacity, division, display, and pan size.
Step-by-step guide to entering and navigating the function setting menu.
Explanation of each parameter value and its configuration options.
Instructions for using manual and preset tare functions.
Configuration and usage of the check weighing function.
