Need help?Do you have a question about the Jadever JWA series and is the answer not in the manual?
Explains the function of each key on the scale's display panel.
Details the function of each button on the scale's keypad.
Describes the procedure to modify various setting values on the scale.
Explains how to set or check the zero point of the weighing scale.
Details the process of taring the scale to exclude container weight.
Outlines the steps for setting a pre-tare value before weighing.
Guides on using the scale for piece counting or percentage weighing.
Explains how to manually accumulate weighing data.
Describes the procedure to manually print weighing data.
Covers various settings and operations related to printing.
Covers functions related to managing serial numbers.
Covers functions related to accumulating weighing data.
Guides on setting the upper limit for weighing checks.
Details setting the lower limit for weighing checks.
Explains how to activate or deactivate the Hi/Lo checking feature.
Guides on setting the upper limit for auto-tare function.
Details setting the lower limit for auto-tare function.
Explains how to activate or deactivate the auto-tare feature.
Describes how to view and adjust the scale's time and date.
Explains the purpose and function of different lock settings.
Guides on how to apply various lock settings to the scale.
Details the procedure to unlock all scale settings.
Describes how to enter and navigate parameter settings.
Provides a detailed explanation of each parameter.
Explains the basic rules and feedback for using the keypad.
Shows connection diagrams for printers.
Shows connection diagrams for connecting to a PC.
Describes the data format for continuous printing.
Lists commands for controlling the scale.
Example of using the scale for quality control based on weight.
Example of checking individual package weights.
Example of using auto-tare with containers.
Addresses issues with printer connectivity and settings.
Explains common reasons for Hi/Lo checking failure.
Provides a method to verify printer compatibility.
Addresses issues with beeping sounds in Hi/Lo checking.
Explains the need for an optional RTC module for time retention.
CPU unable to read EEPROM.
Unable to read 3 points calibration range.
Zero Point is Too High.
Zero Points is Too low.
Unstable Zero Point.
Battery for RTC is too weak.
Overload condition detected.
Unable to accumulate due to unit contradiction.
Last accumulation exceeds preset limit.
Option for BP-443D printer.
Option for SH-24 printer.
Option for LED Display.
Option for LED Light Tower.
Two optional devices: BP-443D and LED Display.
Two optional devices: BP-443D and LED Light Tower.
Two optional devices: LED Light Tower and LED Display.
Three optional devices: BP-443D, LED Display, LED Light Tower.
Relay output diagram for alarm conditions.
Relay output diagram for high limit condition.
Relay output diagram for OK condition.
Relay output diagram for low limit condition.
To Next Page
General
