V02
JWA WEIGHING SCALE
8
【 PCS / % Counting 】
(1) Press and release until unit
change to PCS(or %) mode as
following
(2) Press ,then the selectable PCS will
be blinking as following
(3) Press or to select 10,25,50,
100PCS
(4) Press after getting the selected
PCS
(5) It can start to count PCS after the
blinking vanish..
Note1: If your scale only have either PCS or %, you can skip step(1) to directly press to
Select related PCS or % in any unit mode.
Note2: This sampling base can be used for next time if the scale turn off on proper way.
( don’t plug out the power cable to turn off the scale, it’s inproper way. Please press
to turn off the scale )
To Next Page
Loading...
Need help?
General
