V02
JWA WEIGHING SCALE
14
【Set RS-232 Baud Rate】
(1) Under normal weighing mode keep pressing
for about three seconds.
(2) You will enter into parameter settings.
(3) Press or to switch between the
parameters.
(4) Repeat step (3) until appears like one of the
following.
( , , , )
(5) Press or to choose boud rate.
(6) For example, you select
(7) Press
to save the setting and return to
normal weighing mode.
Note: you also can press
or to save and
go to next parameter setting.
To Next Page
Loading...
Need help?
General
