V02
JWA WEIGHING SCALE
29
【Enable / Disable The Hi/Lo Checking Function】
(1) Under normal mode press the key
(2) The display now is showing the high limit
PS: 4point to Hi (without showing)
(3) Press
if you want to enable Hi & Lo
checking function.
(4) Press if you want to disable the Hi & Lo
checking function.
Execute step(1)(2)(3) to enable Hi/Lo checking Function（Now light tower is available ）
Execute step(1)(2)(4) to disable Hi/Lo checking Function
To Next Page
Loading...
Need help?
General
