To Next PageTo Next Page
Need help?Do you have a question about the Jadever JCAII and is the answer not in the manual?
General| Model | JCAII |
|---|---|
| Category | Scales |
| Display | LCD |
| Power Supply | AC adapter or rechargeable battery |
| Communication Interface | RS-232 |
| Capacity | 30kg |
| Readability | 0.1g |
| Pan Size | 230mm x 190mm |
| Platform Size | 230mm x 190mm |
General introduction to the JCAIl counting scale.
Safety guidelines and important considerations before using the scale.
Steps for unpacking and verifying the contents of the scale package.
Instructions for installing the stainless steel pan onto the scale.
Procedure for leveling the scale using the front panel indicator.
Explanation of the various windows and indicators on the scale's display.
Description of the functions of each key on the scale's keypad.
Technical specifications related to the scale's analog components.
How to enter and navigate the basic parameter setting mode.
Diagram of the sub-channel connector for dual channel setup.
Steps for installing and connecting the remote platform.
Procedure for setting up the dual channel system.
Setting the maximum capacity, division, and units for the scale.
Instructions for calibrating the main scale and remote platform.
How to switch between the main scale and remote platform modes.
Procedure for setting the zero point of the scale.
Steps for performing a simple tare operation.
Instructions for setting and using preset tare values.
Configuration of the auto-tare function.
Entering a known unit weight for counting.
Procedure for sample counting to determine unit weight.
Using the Automatic Counting Accuracy Improvement feature.
How to activate and use the simple recipe function.
Selecting the mode for accumulating data.
Setting the maximum number of accumulation cycles.
Performing manual accumulation of weights or counts.
Viewing stored accumulation data.
Printing accumulation data while it is displayed.
Deleting accumulated data.
Configuring the format for printed output.
Selecting the mode for serial number generation.
Setting the maximum limit for serial numbers.
Manually changing the current serial number.
Selecting the mode for serial number generation.
Setting the maximum limit for serial numbers.
Manually changing the current serial number.
Configuring the print mode for scale output.
Choosing the appropriate printer model for output.
Setting the upper limit for quantity checks.
Setting the lower limit for quantity checks.
Activating or deactivating the quantity check feature.
Setting the upper limit for quantity checks.
Setting the lower limit for quantity checks.
Activating or deactivating the quantity check feature.
Setting the upper limit for weight checks.
Setting the lower limit for weight checks.
Activating or deactivating the weight check feature.
Method for saving unit weight data to an ID.
Alternative method for saving unit weight data to an ID.
Retrieving saved unit weight data by ID.
Setting custom labels for the scale.
Configuring the date and time settings on the scale.
List of error messages and their corresponding solutions.
Troubleshooting common issues and their resolutions.
Details on optional devices and their connection.
Connection diagrams for various printer models.
Instructions for connecting the scale to a PC.
Data format and protocol for printing and communication.
Overview of single optional device applications.
Overview of applications using one optional device.
Overview of applications using one optional device.
Overview of applications using three optional devices.
Overview of applications using three optional devices.
Diagrams for relay outputs and their configurations.
Diagrams showing relay contacts (COM, N.C., N.O.).
