V03
JCAII 8
5. Press key and wait till is displayed in the Total Count window.
6. Press key to save the settings and return to weighing mode
7-6 Set AD gain of remote platform
1. Under normal weighing mode, press for 3 seconds to enter the basic parameter setting.
2. Press for 3 seconds to enter the advanced parameter setting.
3. Press key or to select parameter A-07
4. Press or to select the AD gain. (Options: 1/2/4/8/16/32/64)
5. Press to save and return to normal weighing mode.
7-7 Switch between Main scale and Remote platform
1. Press to switch between main scale mode and sub channel mode (remote platform)
2. The flashed in the Weight Window.
3. When flashing disappear, means that you are in the sub channel mode (remote
platform). Now the remote platform could be used
4. To change back to the main scale mode just press , and will flash in the Weight
Window.
5. When flashing disappear, means that the scale have returned back to main scale
mode.
8. Operation
8-1 Zero-point
Press if you do not see “ ” but symbol “ ” appears
To Next Page
Loading...
Need help?
General
