To Next PageTo Next PageWhat to do if Jadever Accessories exceeds the A/D resolution range?
If your Jadever Accessories exceeds the A/D resolution range, it could be due to an A/D failure, in which case you should replace the A/D. Alternatively, it might be a LOAD CELL failure, requiring replacement or service assistance.
What to do if accumulated number of weighments exceeds the display range for Jadever Accessories?
If the accumulated number of weighments exceeds the display range on your Jadever Accessories, simply delete the exceeding weighments to resolve the issue.
Why does my Jadever Accessories exceed tare or pre-tare range?
If your Jadever Accessories exceeds the tare or pre-tare range, ensure that the tare value is above zero and less than or equal to the full load. Also, place the correct weights (calibration value/full load).
What to do if Jadever Accessories exceed the zero range?
If your Jadever Accessories exceeds the zero range, ensure the item is within 2% of the full load.
Check instrument for transport damage and missing parts upon receipt.
Instructions for installing components, including removing protection screws.
Details on scale models, capacity, division, pan size, and general features.
Detailed description of each key's function and operation.
Step-by-step guide to entering and navigating function settings.
Guide to setting lower and upper limits for check weighing.
Steps for performing simple counting using sample quantities.
Table of error messages, their problems, and troubleshooting steps.
General
