Jandy AquaLink User Manual

AquaLink
®
Wireless Handheld Remote
For use with AquaLink PDA, RS and Z4 Systems
ENGLISH
H0511400_REVD
INSTALLATION AND
OPERATION MANUAL
WARNING
FOR YOUR SAFETY - This product must be installed and serviced by a contractor
who is licensed and qualified in pool equipment by the jurisdiction in which the
product will be installed, where such state or local requirements exist. In the event
no such state or local requirement exists, the maintainer must be a professional with
sufficient experience in pool equipment installation and maintenance, so that all of
the instructions in this manual can be followed exactly. Before installing this product,
read and follow all warning notices and instructions that accompany this product.
Failure to follow warning notices and instructions may result in property damage,
personal injury, or death. Improper installation and/or operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which
can cause serious injury, property damage, or death.

Jandy AquaLink Specifications

General

Brand	Jandy
Model	AquaLink
Category	Remote Control
Language	English

Summary

Important Safety Instructions

Product Description

Basic Functions Overview

Outlines the remote's fundamental capabilities for activating and deactivating equipment.

Remote and Transceiver J-box Dimensions

Provides the physical size specifications for the handheld remote and its transceiver J-box.

Installation Guide

Transceiver J-Box Connection

Details connecting the transceiver J-box to the power center PCB for system integration.

Handheld Remote Installation

Step-by-step instructions for installing the handheld remote, including battery setup.

Changing Frequency Channel

Guide on modifying the RF channel to prevent interference from other remote systems.

Handheld Remote Operation

Menus and Functions Summary

An overview of the remote's menu structure and common operational functions.

Pool and Spa Mode Operation

How to use Pool Mode and Spa Mode to control equipment, valves, and heating.

Heater Control Operation

Instructions for activating and manually adjusting pool or spa heater temperatures.