Janome 15 - Winding the Bobbin; Removing the Bobbin

10
q
w
e
(A)
(B)
z
x
Winding the Bobbin
Setting the spool
Place a spool of thread on the spool pin with the
thread coming off the spool as illustrated.
A: Press the large spool holder rmly against the
spool of thread.
q Large spool holder
B: For a small spool, use the small spool holder.
w Small spool holder
Removing the bobbin
z Push the hook cover plate release button to
the right and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin.
e Bobbin
q
w