Janome 15 - Selecting Stitch Patterns; Adjusting Stitch Length

15
Pattern selector dial
Turn the pattern selector dial to set the symbol of
the desired stitch pattern at the setting mark.
q Pattern selector dial
w Setting mark
CAUTION:
Do not turn the pattern selector dial while the
needle is in the fabric, otherwise the needle
may bend or break.
To select the stretch stitch patterns, set the stitch
length dial at S.S.
e Stretch stitch patterns
Stitch Length Dial
Turn the stitch length dial to set the desired stitch
length number at the setting mark.
The higher the number, the longer the stitch
The “ ” mark shows the adjustment range
when sewing the buttonhole.
r Setting mark
t Stitch length dial
Selecting the Stitch Pattern
Raise the needle to its highest position.
r
t
w
q
e