5
To Attach and Remove the Presser Foot
To remove
Turn the handwheel toward you to raise the needle to its highest
position.
Raise the presser foot.
Press the lever on the back of the foot holder.
The presser foot will drop off.
To attach
Place the presser foot so the pin on the foot lies just under the
groove of the foot holder.
Lower the foot holder to lock the foot in place.
Presser Foot Lifter
The presser foot lifter raises and lowers your presser foot.
You can raise it about 0.6 cm (1/4") higher than the normal up
position for easy removal of the presser foot or to help you to
place heavy fabric under the foot.
Normal up position
Highest position
1
2
1
2
To Next Page
Loading...
