EasyManua.ls Logo

Janome 5060QDC - Machine Operating Buttons

Janome 5060QDC
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
w
q
w Reverse stitch button
Press and hold the reverse stitch button w to sew in
reverse.
Release the button w to sew forward.
Press and hold the button w when the machine is
stopped and foot control is disconnected to sew in
reverse slowly.
Release the button w to stop the machine.
Any other stitches except
Press the reverse stitch button w to sew a locking
stitch immediately. The machine will automatically stop.
Please refer to pages 24, 40 and 41.
q Start/Stop button
Lower the presser foot lifter.
Press the start/stop button q to start the machine.
The machine starts running slowly for the rst few
stitches; it then runs at the speed set by the speed
control slider.
Press the start/stop button q again to stop the
machine.
NOTE:
The machine runs slowly as long as you press and
hold the start/stop button q.
The start/stop button q cannot be used when the
foot control is connected to the machine.
Machine Operating Buttons

Table of Contents

Related product manuals