32
q
ew
r
Button Sewing
q Stitch pattern: 06
w Needle thread tension: 3 to 7
e Presser foot: Satin stitch foot F
r Feed dog: Dropped
z Lower the feed dog.
x Match the holes of button to the horizontal slot on the
presser foot.
c Lower the foot to hold the button in place.
v Adjust the stitch width so the needle will enter the left
hole of the button.
b Turn the handwheel so that the needle will enter the
right hole of the button. Readjust the stitch width if
necessary.
n Stitch several times.
z x c v b n
m ,
m After you nish sewing, cut the threads but leave 8 -
10 cm of threads at the end.
, With a hand sewing needle, draw the top thread to the
reverse side of the fabric and knot the threads.
* After the button sewing is completed, raise the feed
dog for normal sewing.
To Next Page
Loading...
