Janome 5060QDC - Keyhole Buttonhole; Stretch Buttonhole; Antique Buttonhole

38
q
ew
Keyhole Buttonhole
q Stitch pattern: 19
w Needle thread tension: 1 to 5
e Presser foot: Automatic buttonhole foot R
The sewing procedure is the same as the square
buttonhole. Use the seam ripper and an eyelet punch r
to open the buttonhole.
r Eyelet punch
The stitch density can be varied from 0.3 to 0.8
The stitch width can be varied from 5.5 to 7.0.
To change the stitch width or density, refer to page 37.
* An eyelet punch is an optional item.
r
q
ew
Stretch Buttonhole
q Stitch pattern: 20
w Needle thread tension: 1 to 5
e Presser foot: Automatic buttonhole foot R
The machine will sew the front bartack and left row rst.
The machine will sew the back bartack and right row,
then it stops automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 1.0.
To change the stitch width or stitch density, refer to page
37.
q
ew
Antique Buttonhole
q Stitch pattern: 21
w Needle thread tension: 1 to 5
e Presser foot: Automatic buttonhole foot R
The machine will sew the front bartack and left row rst.
The machine will sew the back bartack and right row,
then it stops automatically.
The stitch width can be varied from 2.5 to 7.0.
The stitch density can be varied from 0.5 to 2.5.
To change the stitch width or stitch density, refer to page
37.