Janome 521 - Selecting the Stitch Pattern; Pattern Selector Dial; Stitch Length Dial

30
Selecting the Stitch Pattern
Raise the needle to its highest position.
Pattern selector dial
Turn the pattern selector dial to set the symbol of the
desired stitch pattern at the setting mark.
q Pattern selector dial
w Setting mark
CAUTION:
Do not turn the pattern selector dial while the needle is in
the fabric, otherwise the needle may bend or break.
To select the stretch stitch patterns, set the stitch length
dial at S.S.
e Stretch stitch patterns
Stitch Length Dial
Turn the stitch length dial to set the desired stitch length
number at the setting mark.
The higher the number, the longer the stitch
The “ ” mark shows the adjustment range when
sewing the buttonhole.
r Setting mark
t Stitch length dial
q
w
e
r
t