80
Appliqué
Machine setting
q Stitch pattern: C
w Stitch width: 3 – 5
e Stitch length: 0.5 – 1
r Thread tension:1 – A
t Presser foot: Buttonhole foot B
y Foot pressure: “2”
Baste appliqué pieces on the fabric, or fuse the appliqué
pieces with an iron-on fabric joiner.
Stitch around the appliqué, making sure the needle at
the right swing falls along the outer edge of the appliqué.
Turning the corner:
Stop the machine and lower the needle into the fabric at
the outer edge of the appliqué.
Raise the presser foot and pivot the fabric into the new
direction.
NOTE:
Return the foot pressure dial to “3” after finishing.
q
w
e
r
t
y
To Next Page
Loading...
