EasyManua.ls Logo

Janome 7330 - Variety of Overcasting Stitches; Overcasting with Zigzag Stitch; Multiple Zigzag Stitch (Tricot Stitch); Overcasting Stitch

Janome 7330
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
q w e
q w e
q w e
Variety of Overcasting Stitches
Multiple zigzag stitch (Tricot stitch)
Machine settings
q Pattern: #09
w Presser foot: Zigzag foot A
e Thread tension: 3-7
Overcasting stitch
Machine settings
q Pattern: #10
w Presser foot: Zigzag foot A
e Thread tension: 3-7
Overcasting with zigzag stitch
Machine settings
q Pattern: #08
w Presser foot: Zigzag foot A
e Thread tension: 3-7
Carefully guide the fabric so the needle falls off the
edge when it swings to the right.
This stitch is used to finish a raw edge of synthetics
and other stretch fabrics that tend to pucker.
Sew along the fabric edge leaving an adequate seam
allowance.
After sewing, trim the seam allowance close to the
stitches.
This stitch can be used to simultaneously seam and
overcast edges of fabrics.
Use this stitch when you do not need to open seams
flat.
Carefully guide the fabric so the needle falls off the
edge when it swings to the right.

Table of Contents

Other manuals for Janome 7330

Related product manuals