Janome 7330 - Round End and Keyhole Buttonholes; Altering the Buttonhole Width

46
q
q
w
w
q w
q w
Round end and keyhole buttonholes
Machine settings
q Pattern: #17, 18
w Presser foot: Automatic buttonhole foot R
e Thread tension: 1-5
Altering the buttonhole width
Round-end buttonhole
Press the mode key to activate the stitch width
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 2.5 and 5.5.
Keyhole buttonhole
Press the mode key to activate the stitch width
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 5.0 and 7.0.
* See page 44 for altering the stitch density.
The sewing procedure is the same as the square
buttonhole #16.
q Starting point
w Bartacking