EasyManua.ls Logo

Janome 7330 - Buttonholes; Square buttonhole; Round-end buttonhole; Keyhole buttonhole

Janome 7330
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Buttonholes
Variety of buttonholes
#16 Square buttonhole
This square buttonhole is widely used on medium to
heavy weight fabrics.
The buttonhole size is automatically determined by
placing a button in the rear of the foot.
Square buttonhole
Machine settings
q Pattern: #16
w Presser foot: Automatic buttonhole foot R
e Thread tension: 1-5
NOTES:
The size of a buttonhole is automatically set by
placing a button in the rear of automatic buttonhole
foot R.
The button holder of the foot takes a button size of
0.5 cm (3/16 ”) to 2.5 cm (1) in diameter.
It is sometimes necessary to change the buttonhole
size to match certain heavy or specific fabrics and
threads.
Make a test buttonhole on an extra piece of the
fabric to check your settings.
The preset width of the buttonhole is suitable for
ordinary buttons.
Apply an interfacing to stretch or fine fabrics.
#17 Round-end buttonhole
This buttonhole is used on fine to medium weight
fabrics especially for blouses and children’s clothes.
#18 Keyhole buttonhole
The Keyhole Buttonhole is widely used on medium to
heavy weight fabrics. It is also suitable for larger and
thicker buttons.

Table of Contents

Other manuals for Janome 7330

Related product manuals