EasyManua.ls Logo

Janome 7330 - Applique Sewing; CARE AND MAINTENANCE; Removing the light bulb

Janome 7330
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
q
q w e r
q w e
Patchwork
Machine Settings
q Pattern: #29
w Presser foot: Satin stitch foot F
e Thread tension: 1-4
Applique Sewing
Machine Settings
q Pattern: #28
w Presser foot: Satin stitch foot F
e Thread tension: 1-4
r Presser foot pressure adjusting lever: 2 or 1
Place the applique on the fabric and baste it in place.
Sew, guiding the edge of the applique along the slit
on the foot, so that the needle falls off the edge of the
applique when it swings to the right.
NOTE:
When changing the sewing direction at a corner or
curve, lower the needle into the applique at the left
swing and turn the fabric to a new direction.
Sew the seam with straight stitch and press seam
allowance to open.

Table of Contents

Other manuals for Janome 7330

Related product manuals