Janome Air Thread 2000D Professional - ESSENTIAL PARTS Names of Parts

NOTE:
Serger/Overlocker/Overlock machine design and
specifications are subject to change without prior
notice.
ESSENTIAL PARTS
Names of Parts
q Left needle thread tension dial
w Right needle thread tension dial
e Upper looper thread tension dial
r Lower looper thread tension dial
t Lower looper pre-tension setting slider
y Stitch length dial
u Differential feed dial
i Ventilation openings
o Handwheel
!0 Machine socket
!1 Power switch
!2 Looper cover
!3 Side cover
!4 Presser foot pressure dial
!5 Thread guide
!6 Thread guide bar
!7 Spool holder
!8 Ventilation openings
!9 Spool pin
@0 Hole of rear arm
@1 Top cover thread guide
@2 Needle threader lever
@3 Face plate
@4 Thread cutter
@5 Presser foot lifter
@6 Needle threader switch lever
@7 Presser foot
@8 Upper looper
@9 Spreader
#0 Lower looper
#1 Looper threader hole
#2 Looper selection lever
#3 Looper threader switch lever
#4 Looper threader lever
#5 Upper knife release knob
#6 Looper cover guide
#7 Cutting width adjusting dial
#8 Chaining finger switch knob
#9 Lower knife
$0 Upper knife
$1 Chaining finger
@2
@3
@4
@5
@6
@7
q w e r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!7
!8
!9
@0
@1
#0
#1
#2
#3
#4
#6
#5
#7
#8
@8
@9
#99
$0
$1
3