Janome DC6030 - Extension Table; Free-arm Sewing; Accessory Storage

7
Rear Cover
To remove:
1. Remove the free-arm cover.
2. Remove the setscrews (A) (5 pcs.).
3. Remove the setscrews (B) (4 pcs.) and back cover.
4. Remove the setscrews (C) (1 pcs.) and setscrews (D) (2 pcs.). Remove the rear cover.
Lower the presser foot lifter.
Remove the part around the presser foot lifter, and remove the part around the machine socket.
To attach:
5. Follow the above procedures in reverse.
Changing External Parts (4)
Setscrews (A)
Setscrews (A)
Setscrews (B)
Setscrews (B)
setscrews (C)
Back cover
Rear cover
Presser
foot lifter
Setscrews (A)
Setscrews (D) Setscrews (D)