25
Rolled Hem
q
Pattern selector: A/B
w
Presser foot: Hemmer foot
e
Thread tension: 2-6
r
Stitch length: 2
t
Stitch width: 5
w e
z Trim off the corner of the fabric 0.5 cm (3/16˝)
by 0.8 cm (5/16˝) to avoid a bulkiness of the
hem at the corner.
Fold the fabric edge twice 0.3 cm (1/8˝) wide
and 6 cm (2 3/8˝) long.
q Wrong side of the fabric
w 0.5 cm
e 0.8 cm
r Curl of the foot
x Place the fabric aligning the hem edge with
the guide on the foot. Lower the foot and sew
several stitches while pulling both threads to
the back. Stop the machine with the needle
in the fabric and raise the presser foot. Insert
the folded portion of the fabric into the curl of
the foot. Lower the foot and sew while litting
up the edge to keep it feeding smoothly and
evenly.
z
x
r
q
w
e
q
r t
To Next Page
Loading...
