12
Setting for Dual Feed Sewing
WARNING:
Turn the power switch off before changing the presser
foot.
Attach the dual feed foot when sewing with the dual feed
device.
Attaching the dual feed foot
z Remove the needle and loosen the thumbscrew with
the screwdriver.
1 Thumbscrew
x Raise the presser foot and loosen the thumbscrew to
remove the foot holder .
2 Foot holder
c Attach the dual feed foot to the presser bar and
tighten the thumbscrew lightly. Lower the presser
foot and tighten the thumbscrew securely with the
screwdriver.
3 Dual feed foot
4Presser bar
Setting the dual feed device
z Raise the presser foot lifter to the extra lifted position.
1 Extra lifted position
x Hold the dual feed device and lower it slowly.
2 Dual feed device
c Swing the dual feed device forward to the underside of
the dual feed foot until they engage.
z
c
x
1
4
3
2
z
c
x
1
2
To Next Page
Loading...
