70
Satin Stitches
Machine settings
Pattern: 131-150 (Satin)
Thread tension: AUTO
Presser foot: Satin stitch foot F
Foot pressure: 7
The stitches in this group can be elongated up to 5 times
their original length while the stitch density remains the
same.
Example: Pattern number 134
Select pattern number 134.
Press the elongation key to select the desired
elongation ratio.
Elongation ratio is indicated in multiples of the original
pattern length; X1 (original length) to X5.
1 Elongation ratio
The stitch length and width can also be changed.
X1 X2 X3
X4
X5
1
Sewing Border Designs with the Border Guide
Foot
Machine settings
Pattern: See example below
Thread tension: AUTO
Presser foot: Border guide foot
Foot pressure: 7
Example: Patterns number 249, 61,250
Attach the border guide foot
z Select pattern 250 and sew a line of the pattern.
Position the fabric so that the line of pattern 250 fits
between the right guides of the foot.
x Select pattern 249 and sew a line of the pattern.
c Position the fabric so that the 2 lines of patterns fit
between the inner guides of the foot.
v Select pattern 61 and sew a line of the pattern.
z
x
c
v
To Next Page
Loading...
