31
Using the Cloth Guide
Remove the extension table and attach the extra wide
table.
Attach the cloth guide to the free arm by pushing the cloth
guide down to snap it in place.
Slide the cloth guide to the desired position.
Place the fabric with its edge against the cloth guide and
sew.
1 Cloth guide
2 Free arm
Peel off the backing paper from the rubber soles and
attach to the bottom of the legs.
1 Rubber sole
2 Leg
3 Setscrew
Attach the 6 legs to the table top with the setscrews.
4Table top
Place the assembled table to the machine as shown.
Slide the table to the right until the table catches the pin
on the backside of the free arm.
Adjust the height of the table top by turning the adjusting
screw.
5 Adjusting screw
Assembling the Extra Wide Table
4
3
2
1
5
1
2
To Next Page
Loading...
