Caution
When the electro press is being operated or adjusted, keep the operation manuals in a
handy place so that you or the operator can refer to them whenever necessary.
Safety precautions should not necessarily be limited only to those prescribed in the
operation manuals. Please consider any possible dangers that may exist in your
specific operating environment and take the appropriate precautionary measures against
these.
1. INSTALLATION
1.1 Securing the press environment
Always use a safeguard.
A person putting his hand inside the machine’s working area may be injured.
Install an interlock as a safeguard that triggers an emergency stop when activated.
Use the I/O-S connector included in the package.
For details, please see the operation manual <Setup>.
I/O-S
Connection
Area Sensor Controller
Area Sensor
<Example of the Area Sensor>
For Your Safety Electro Press JP Series 4 2
To Next Page
Loading...
