External Control (I/O / Fieldbus) 23 DESKTOP ROBOT JR3000
2.6
Power Supply Capacity
Caution
Adhere to the rated amperage outlined in the table below. If you exceed the values
listed below, the internal circuits may be damaged.
Power Supply Internal External
Voltage DC 24 V DC 24 V
Amperage per pin
(when using DC 24 V)
100 mA or less 100 mA or less
Total amperage (I/O-SYS + I/O-1) 1.6 A or less 1.6 A or less
NOTE:
Use an IEC/EN 62368-1 certified power supply unit (DC 24 V) for the external power.
To Next Page
Loading...
