8
CAUTION:
Turn off the power switch when
changing a presser foot.
To Attach and Remove the Presser Foot
To remove:
Turn the handwheel toward you to raise
the needle to its highest position.
Raise the presser foot.
Press the lever on the back of the foot
holder.
The presser foot will drop off.
To attach:
Place the presser foot so the pin on the
foot lies just under the groove of the foot
holder.
Lower the foot holder to lock the foot in
place.
Presser Foot Lifter
The presser foot lifter raises and lowers
your presser foot.
You can raise it about 0.6 cm (1/4˝) higher
than the normal up position for easy
removal of the presser foot or to help you
to place heavy fabric under the foot.
q Normal up position
w Highest position
q
w
To Next Page
Loading...
