27
1
3
2
4
12 3 4
5
Buttonhole
1 Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the
buttonhole marking running toward you.
2 Move the slider (A) toward you so that
the top mark (C) on the slider meets the
start mark (B). Line up the markings on
the starting point on the fabric.
Note: The scale on the slider is
engraved in centimeters.
Machine Setting
1 Stitch Pattern : (BH)
2 Stitch Length : 0.5-1
3 Stitch Width : 5
4 Thread Tension : 1-5
5 Presser foot : Buttonhole foot
(A)
(B)
(C)
To Next Page
Loading...
