5
Foot Control
Sewing speed can be varied by the foot
control.
The harder you press on the control,
the faster the machine runs.
WARNING:
While in operation, always keep your eyes on the sewing area, and do not touch
any moving parts such as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the power supply:
– when leaving the machine unattended.
– when attaching or removing parts.
– when clearning the machine.
Do not place anything on the foot control, otherwise the machine will run intermittently.
Operating Instructions:
The symbol "O" of a switch indicates the "off" position of a switch.
For an appliance with a polarized plug (one blade wider than the other):
To reduce the risk of electrical shock, this plug is intended to fit in a polarized
outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not modify the plug in any way.
The foot controller Model KD-1902 (USA and Canada market) or KD-2902
(230V,Europe) is used with the sewing machine. Model Sew Simple 113.
To Next Page
Loading...
