28
3 Set the pattern selector dial at " ".
Sew forward until you reach the marking
of your buttonhole q.
Stop sewing at a left stitch.
4 Set the pattern selector dial at " ".
Sew 5 stitches. Stop sewing at a right
stitch.
5 Set the pattern selector dial at " ".
Sew until you reach the marking of
the buttonhole w.
Stop sewing at a right stitch.
6 Set the pattern selector dial at " ".
Sew a few bartacks and raise the
needle from the fabric.
Set the stitch length dial to "0" and the
pattern selector dial at straight sewing.
Sew a few locking stitches.
7 Remove the fabric from the machine and
cut the sewing thread. Insert a pin inside
the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
q
w
To Next Page
Loading...
