Janome MEMORY CRAFT 9500 - Adjusting Needle Drop Position for Blind Hem

www.toews.com
37
Adjusting the needle drop position
Press the Adjust key to open the stitch width and
length adjusting window.
Press the key to move the needle position to the
right.
Press the key to move the needle position to the
left.
Press the OK key to register the settings. The needle
should just pierce the folded edge when it comes over
to the left side.
1Stitch Width Adjusting Keys
2 Default Key: Resumes the default settings.
3 Cancel Key: Cancels the last changes to
settings.
4OK Key: Enables the current setting.
5Guide on the Foot
6 Left Needle Drop position
7 Right Needle Drop Position
0.6 2.00
Default
Cancel
OK
1
5
6
7
4
2
3
Janome Memory Craft 9500 Instruction Manual
Janome Sewing Machine
www.toews.com
MC9500 Owners Manual/ User Guide