Janome MEMORY CRAFT 9500 - Zipper Sewing; Attaching the Zipper Foot

www.toews.com
38
Zipper sewing
Select the pattern 01.
Attach the Zipper Foot E.
Attaching the zipper foot
(A) Attach Zipper Foot E with the Pin on the Right-
hand Side to the Groove to sew the left side of
the zipper.
(B) Attach Zipper Foot E with the Pin on the Left-
hand Side to the Groove to sew the right side of
the zipper.
1 Pin
2 Groove
Fabric Preparation for Zipper Sewing
Add 1 cm (3/8”) to the zipper size. This is the overall
Opening Size.
Place the right sides of the fabric together and sew to
the End of the Zipper Opening. Fasten the seam with
reverse stitching.
Press the Adjust key and manually increase the stitch
length to 5 mm (3/16”). Press the OK key to register
the setting and loosen the tension to “1”. Sew the
zipper opening. You may also use the Basting Stitch.
1 Right Side of the Fabric
2 1 cm (3/8”)
3Opening Size
4 Zipper Size
5 Slider
6 Zipper Teeth
7Zipper Tape
8 End of the Opening
9 2 cm (13/16”) Seam Allowance
10 Zipper Opening
11 Reverse Stitches
1
1
2
3
4
7
6
5
9
10
11
8
2
1
A Z
Straight Stitch
1 2 3
4
5 6
7 8 9
10
11 12
A
Auto
SET
Adjust
3
1
2
2
Janome Memory Craft 9500 Instruction Manual
Janome Sewing Machine
www.toews.com
MC9500 Owners Manual/ User Guide